Видео

Thanks for your feedback. I'm sorry I couldn't help you.

First remove the clip, swap the polarity of ends A and B, and then reinstall and connect them.

Thanks for your support！

The integrated dovetail clip wire stripping tool can more conveniently crimp the crystal plug with a dovetail clip. It is sold on our official website. You can check www.fs.com/products/139530.html

You can cut it to the same length as the crystal plug. Our goal is to put it into the crystal plug without exposing the twisted pair.

No, just use the tools in the video. The tool kit can be found at www.fs.com/products/79659.html

Hola Jose, ¿sobre qué producto te gustaría conocer? Puede visitar www.fs.com/mx o comunicarse con su gerente de cuenta para consultas.

According to the official website, the port power of the PoE Injector is 15.4W, and any IPC (Internet Protocol Camera) below the rated power of the product can be connected and used normally. www.fs.com/products/65988.html

The signal of the QSFP port can be divided into four independent channels through the QSFP to SFP+ breakout cable, and each channel can be connected to a different switch. Each channel transmits an independent data stream, and the switch can be configured to route these flows to different destinations, thus achieving the effect of connecting a single QSFP port to multiple switches.

Yes, the 24-port blank patch panel is widely compatible with Cat5e/Cat6/Cat6a/Cat7 cables, both shielded and unshielded can be used. You can order it from FS, check out the link: www.fs.com/products/69182.html

Thank you for your trust.

Yes, it can be used as a core switch. But does your home have a DC power supply environment? If not, it is recommended to buy an AC power switch - S5850-24S2Q.

You can find out from the datasheet that the acoustic noise of S5850-24S2Q is 52.6dB.

Choose the corresponding switch according to your environment, whether DC or AC. The S5850-24S2Q-DC switch uses DC power, while ordinary switches use AC power.

Yes, it supports Red Hat RHEL 8.10 (Ootpa). You can download the E810 driver from the Intel official website and update it to the latest version.

Our technology and products are constantly updated. Products that support pcie4.0 include RS7260-V2 and RS6140-V2. Products supporting pcie5.0 are expected to be online this quarter.

Ambas opciones son adecuadas para diferentes escenarios de aplicación. El uso directo de patch panels de fibra es ideal para conexiones de fibras preconectorizadas, mientras que colocar ODF con caja es adecuado tanto para conexiones de fibras preconectorizadas como para cables de fibra no preterminados. La caja interna del ODF permite la colocación de bandejas de empalme para realizar operaciones de empalme de fibra.

You can view product details or contact account manager for help. www.fs.com/products/157434.html

@@FS_com it seems the GUI is not standardized across your products. That's a pretty big negative in trying to commit to "one manufacturer". So it would be good to know if there is some time or reason why some switches have a really stripped down interface vs something we can use.

@@ChrisNicholson This model supports web management and the interface is relatively simple. Thank you for your feedback. If you have any suggestions, please contact us at FS.com.

PoE standards come in three types: IEEE 802.3af (Standard PoE), IEEE 802.3at (PoE+), and IEEE 802.3bt (PoE++ or Higher-Power PoE). PoE (802.3af): The power delivery is limited to 15.4 watts per port. This standard supports devices like VoIP phones and sensors. PoE+ (802.3at): An enhanced version. It provides higher power delivery capabilities, allowing up to 30 watts of power per port. This increased power capacity makes PoE+ suitable for powering devices that require more power, such as IP cameras, wireless access points, and VoIP phones. PoE++ (802.3bt): Latest iteration. It offers even higher power delivery capabilities compared to PoE+. Depending on the implementation, it can deliver up to 60 or 100 watts of power per port. PoE++ is designed to power a wider range of devices, including high-power devices like pan-tilt-zoom (PTZ) cameras, video conferencing systems, and advanced access points. For more information, please check the blog: community.fs.com/article/understanding-poe-standards-and-poe-wattage.html

@@FS_com Thanks , But PoE Splitter is work with all POE types?

Different PoE splitters have different standards due to differences in power delivery. Taking FS products as an example, PI35A-1#65989 has a total power of 35W and is compatible with 802.3at/802.3af. But PI18A-1 #65988 is 802.3af compliant and provides up to 18W PoE.